Stainless Steel Flue Systems suitable for all condensing boiler applications including all draft regulators and flue fans.
The Stainless Steel Fluing System offers considerable cost and time savings over conventional stainless steel welded flues. Available in sizes from 80–500mm diameter, this product will suit your requirements for any size boiler installation.
Available in sizes 80–500mm diameter
Stainless Steel AISI 316L construction
No welding required on site
Suitable for Condensing Boilers
Click this Add to Quote Request button if you require assistance with flue sizing and component selection. Alternatively, click on the components you require below, select the size and add the required quantity to your Quote Request Cart.
Watch this video for some important installation advice.
All flue parts are to be assembled in a consistent fume direction (as indicated by arrows)
Gaskets must be placed inside the female socket, with the profiled face always pointing inwards towards the centre, smooth side outwards seated in the groove. Condensing Boilers – Black Gaskets, Non Condensing Boilers – Red Gaskets
Using silicone spray on the male element, join together gently ensuring gasket remains in groove.
Fasten the locking band around the ridges of the male and female joint, taking care to ensure that the pointed arrow is fitted to match the direction of flow. The locking band will only fit properly in one direction.
Meridian Flue Manifold Kit (MFMK)
Installation Notes and Part Numbers
Insert the plastic flue piece (ø100mm) into the boiler
Connection of ø160mm flue to ø300mm flue at 45 angle is to encourage condensate to flow through ø300mm flue to drain point rather than drain back into boiler via the ø160mm flue
Product Quick Check
Range: 80, 100, 160, 200, 300, 400, 500mmØ
Quick clamp system saving installation time
Suitable for use with Condensing Boilers